facebook_pixel

Delta Series AR-15 Bore Guide

MSRP: $34.99

Availability: In StockItem Number: 156213Category: Gunsmithing & Cleaning

In stock

The folks at Wheeler Engineering are committed to meeting the expectations of all gunsmiths- professional, amateur and student alike.

Product Description

The AR-15 Bore Guide is precision CNC machined aluminum with a durable anodized finish. It fits securely in any AR-15 upper and can be retained in place by closing the dust cover on the upper which engages a groove in the guide. The bore guide also has chemical resistant O-rings for retention in uppers without dust covers. It works well with .223 and .204, extending inside the chamber to prevent solvent from leaking into the action. A solvent port is conveniently located to the rear of the guide which extends out of the upper making it easily accessible during cleaning. Inner tube diameter .250″ (not intended for 6.8mm jag). The Delta Series AR-15 Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.

  • Protects chamber & bore from damage
  • Ensures proper rod alignment for easier cleaning
  • Reduces solvent leakage into gun’s action
  • Anodized aluminum for durability
  • Integrated solvent port
  • Fits AR-15s in .223 and .204
  • Secures in place with dust cover engagement

 

Reviews

There are no reviews yet.

Be the first to review “Delta Series AR-15 Bore Guide”

Your email address will not be published. Required fields are marked *

Product Specifications

  • WARNING
  • INSTRUCTIONS:
  • The Bore Guide is simple to use.  1) Remove the bolt carrier assemble and charging handle from the upper and insert the Bore Guide. 2) Rotate the Bore Guide until the solvent port is facing directly upward. 3) Close the dust cover to lock the Bore Guide into position. 4) After cleaning, rotate the Bore Guide approximately 90 degrees clockwise until the solvent port is aligned with the dust cover side of the upper and pull the guide to the rear. This will open the dust cover and release the Bore Guide.   
  • It works well with .223 and .204, extending inside the chamber to prevent solvent from leaking into the action. A solvent port is conveniently located to the rear of the guide which extends out of the upper making it easily accessible during cleaning.
  • Inner tube diameter .250″ (not intended for 6.8mm jag)

Product Downloads

156213-action-faded-flat

(High Resolution Photo)
Web Files
Print Files

156213-action

(High Resolution Photo)
Web Files
Print Files

156213-box-planogram-MOCK-BTI

(High Resolution Photo)
Web Files
Print Files

156213

(High Resolution Photo)
Web Files
Print Files

Product Videos