Platinum Series Case Trim and Prep System

MSRP: $249.99

Availability: In StockItem Number: 903156Category: Case Trim & Preparation

In stock

Find a Dealer
Frankford Arsenal is one of the world's leading brands of metallic reloading equipment.

Product Description

Platinum Series Case Trim & Prep Center Frankford Arsenal’s® Case Trim & Prep Center accurately trims brass in seconds. An innovative Case Holder with Adjustable Collet and Bushing System indexes the case shoulder and can be set to precisely trim brass to the exact desired case length. Once the case holder is adjusted simply insert brass into the case holder as a collet aligns the case squarely with the hi-speed cutter. As the case mouth contacts the cutter it is trimmed until the case shoulder stops on an internal bushing. A series of three collets and five bushings (all included) accommodate any shouldered case from 17Rem-460Wby. In addition to the cutter, the station operates up to three additional tools at the same time. Inside and outside chamfer tools and primer pocket cleaners are included to fully prepare cases for loading. The heavy duty motor and drivetrain are optimized for durability and performance. Cutters and Chamfer tools are constructed of high quality hardened steel. A convenient built in storage box holds spare collets, bushings and tools. Patent Pending. Patent Pending Adjustable Collet System works with all cases from 17 Remington to 460 Weatherby (Cases must have a shoulder) Indexes cases on the shoulder for speed and precision Makes Trimming and Chamfering Cases fast and easy with no need for shell holders VLD Inside Chamfering Tool makes loading easier and prevents damage to bullets Outside Chamfer Tool, Large and Small Primer Pocket Cleaning tools included 3 Output shafts accept all case trimming accessories with 8-32 threads Aluminium and Steel construction for extreme durability and long life Ultra-Hard HSS Cutters stay sharp for thousands of rounds to make trimming quick and easy Can be operated in a variety of positions with included adjustable stand and non-skid feet Built-in storage box holds extra tools and keeps everything ready and organized

 

  • Adjustable Collet System works with all cases from .17 Remington® to .460 Weatherby® (Cases must have a shoulder)
  • Indexes cases on the shoulder for speed and precision
  • Makes Trimming and Chamfering Cases fast and easy with no need for shell holders
  • VLD Inside Chamfering Tool makes loading easier and prevents damage to bullets
  • Outside Chamfer Tool, Large and Small Primer Pocket Cleaning tools included
  • 3 Output shafts accept all case trimming accessories with 8-32 threads
  • Aluminum and Steel construction for extreme durability and long life
  • Ultra-Hard HSS Cutters stay sharp for thousands of rounds to make trimming quick and easy
  • Can be operated in a variety of positions with included adjustable stand and non-skid feet
  • Built-in storage box holds extra tools and keeps everything ready and organized

3 reviews for Platinum Series Case Trim and Prep System

  1. 5 out of 5

    :

    Just got one of these a week ago….i have to say what a life saver…..thing does a incredable job at trimming all my brass. about 4000 .223 done so far and still going strong. customer service is also 5 star.

  2. 5 out of 5

    :

    Just bought one of these a couple months ago. After a little practice setting up the trimmer it works great & cuts my trimming time down by 90%. It will trim them as fast as you can feed the cases. A good investment for the avid reloader !

  3. 5 out of 5

    :

    The very best 150 bucks I have spent in a long time. I have needed a trim and prep station for way to many years. But did not what to spent the 350 to 450 dollars on one. I saw this Frankford at 150 bucks. I started looking at reviews on Midway USA (a 101 of them). I always look at the lowest or bad reviews first. I have a 221 Fireball that the overall case is 1.40″. It is the parent case of 300 Blackout. Someone said that a Blackout was to short to work with this trimmer, had to use gloves to push it into the trimmer. I know someone did not have the unit adjust properly. If adjust properly very little pressure needs to be applied, and it dose not take any of grip to kept the case from turning. On an 221 Fireball .325″ is what is sticking out of the collet. If the collet is adjusted properly with just a little resistance the case does not turn and can be removed easily. It may some time before I know just how good this unit is but after trimming the fires 100 Fireball the trim unit is very accurate and consistent, and inside and outside work very well, and are 100 % improvement than my drill press. Midway sales them a good price but at high dollar shipping charge. Walmart has them at the same price with free store pickup, but paid state sales tax.

Add a review

Your email address will not be published. Required fields are marked *

Product Specifications

Works with all cases from .17 Remington® to .460 Weatherby® (Cases must have a shoulder)

Instruction Manual(s)

903156-Case-Trim-and-Prep-Center-Instructions

Print Version

Product Downloads

903156-CTPC-Side-No-Cord

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-Step-1

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-Step-2

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-Step-3

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-Step-4

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-Verttif-No-Cord

(High Resolution Photo)
Web Files
Print Files

903156-ISO

(High Resolution Photo)
Web Files
Print Files

903156-Open-Case

(High Resolution Photo)
Web Files
Print Files

903156-trimming-parts

(High Resolution Photo)
Web Files
Print Files

903156

(High Resolution Photo)
Web Files

903156-CTPC-contents

(High Resolution Photo)
Web Files
Print Files

903156-CTPC-flat-No-Cord

(High Resolution Photo)
Web Files
Print Files

Product Videos