facebook_pixel

Professional Retical Leveling System

MSRP: $59.99

Availability: In StockItem Number: 119050Category: Scope Mounting & Bore Sighting

In stock

Find a Dealer
The folks at Wheeler Engineering are committed to meeting the expectations of all gunsmiths- professional, amateur and student alike.

Product Description

Technological advances in today’s modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system’s scope is critical to realizing the accuracy. A scope’s reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Wheeler® Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

  • Precision tool for scope reticle alignment Factory calibrated Reference Level
  • Maximize accuracy potential Tunable Barrel Clamp Level
  • CNC machined aluminum level housings Protective storage case

1 review for Professional Retical Leveling System

  1. 5 out of 5

    :

    So this is the 4th BTI product I’m reviewing and I have to say this leveling kit makes scope mounting easy. I purchased it when I bought my Tipton Best Gun Vise (see review) and was surprised at how simple it is to use. Highly recommend.

Add a review

Your email address will not be published. Required fields are marked *

Instruction Manual(s)

119050-prof-ret-level-system-instr

Web Version

Product Downloads

119050-On-table

(High Resolution Photo)
Web Files
Print Files

119050-Mood-Table-case-scope

(High Resolution Photo)
Web Files
Print Files

119050-Mood-Open-case-

(High Resolution Photo)
Web Files
Print Files

119050-Mood-Case

(High Resolution Photo)
Web Files
Print Files

119050-incase

(High Resolution Photo)
Web Files
Print Files

119050-down-barrel

(High Resolution Photo)
Web Files
Print Files

119050-Close-up-scope

(High Resolution Photo)
Web Files
Print Files

119050-box-planogram

(High Resolution Photo)
Web Files

119050-box

(High Resolution Photo)
Web Files
Print Files

119050-PRLS-Action-Shot-Close-Up

(High Resolution Photo)
Web Files
Print Files

119050-PRLS-Action

(High Resolution Photo)
Web Files
Print Files

119050-PRLS-Storage-Case-Open

(High Resolution Photo)
Web Files
Print Files

119050-prof-retic-ls-ps

(High Resolution Photo)
Web Files
Print Files

119050

(High Resolution Photo)
Web Files
Print Files

Product FAQs

How should I position the two levels?

Place the Reference Level (smaller one) on a wide, flat area that is level with the receiver, where the level itself is perpendicular to the rifle bore. Place the Barrel Clamp on the barrel near the fore end of the firearm, keeping it approximately level. Adjustments will be made.

What is the leveling process?

First, level the reference level by adjusting the gun in its vise. Then, adjust the knobs on the barrel clamp level until it is precisely aligned with the reference level. The Barrel Clamp level is now indexed to the firearm. Remove the reference level and install your scope. Leave the screws loose enough to rotate the scope. Place the reference level on top of the top of the scope’s elevation turret. Rotate the scope until the levels align. Tighten the scope ring screws.

What is the PRLS made of?

It is made of high-quality, anodized aluminum.

Product Videos