F.A.T. Wrench® with 10 Bit Set

F.A.T. Wrench® with 10 Bit Set

MSRP: $68.99

Availability: In StockItem Number: 553556Category: Screwdriver Sets & F.A.T. Wrench

In stock

Change Qty.
The folks at Wheeler Engineering are committed to meeting the expectations of all gunsmiths- professional, amateur and student alike.

Product Description

Wheeler’s FAT Wrench® brings perfect consistency to every screw on your rifle!

This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.

The FAT Wrench® is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

Patent:  www.btibrands.com/patents

  • Torque adjustments range from 10 inch pounds to 65 inch pounds
  • Accuracy plus/minus 2 inch pounds
  • 1/4″ drive

Plastic Case Included

Bits Included: (click to order bit packs)

  • Leupold/Buehler windage bit
  • #10 flat blade bit
  • #11 flat blade bit
  • #32 flat blade bit
  • 3/32″ Allen bit
  • 7/64″ Allen bit
  • 5/32″ Allen bit
  • T15 Torx bit
  • T20 Torx bit
  • Square drive adapter bit

Notice for California consumers:
⚠ WARNING: Cancer – www.P65Warnings.ca.gov

1 review for F.A.T. Wrench® with 10 Bit Set

  1. nmaglio

    I am sorry this was your experience. I can assure you this was not how this product comes and that this must have been an item returned to amazon. Items sold through amazon are not shipped directly from us they are all fulfilled by Amazon and other dealers.

Add a review

Your email address will not be published. Required fields are marked *

Product Specifications

  • Length: 6″
  • Torque Adjustment Range: 10 inch lbs to 65 inch lbs
  • Quantity of Bits Included: 9
  • Drive Size: 1/4″
  • Accuracy: +/- 2 inch-lbs

Instruction Manual(s)


Web Version

Product Downloads


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files


(High Resolution Photo)
Web Files
Print Files

Product Accessories

Product FAQs

What do I need a Tourque Wrench?
Adjusting screws on gun actions, scope bases ans scopre rings can not only prevent damage to your gun but can greatly increase accuracy.

What torque should I adjust my fasteners to?
Always refer to manufacturesr specs but we recommend:
Base Screws                   30 inch-lbs
Ring Screws (aluminum)    10 -15 inch-lbs
Ring Screws (Steel)         15-20 inch-lbs
Windage Screws              30-40 inch-lbs
Guard Screws
(with bedding pillars)   65 inch-lbs
(no bedding pillars)     40 inch-lbs
*note: middle guard screw should not be torqued

Will the bits from my Wheeler Engineering Screwdriver Set fit in the FAT Wrench?
Yes. The bits included in the Wheeler 89pc set and 72pc set are designed to work perfectly with the FAT Wrench.

Storage Tip for FAT Wrench.
Never leave the Fat Wrench adjusted to high torque settings for extended periods of time. After each use adjust the torque to the lowest setting prior to storage. This will releive the tension from the internal mechanisms and ensure maximum accuracy over time.

Product Videos